CHEMCOKOREA 켐코코리아

Thermal Conductivity Sensor Range : TC-S70: 1.3-10.3 W/mTC-S100 and TC-S70 TC-S100: 0.8-6 W/mAccuracy : ±5°CTemperature Sensor Storage/Drying range : -50 to 120°COperating Range : -40 to 85°CResolution : 0.01°CAccuracy : ±0.01%Heater Current Range : 20-200 mAResolution : 10 µAAccuracy : ±0.05%Heater Power Range : 0.5-20 W/m (depending on needle sensor)Resolution : 10 mW/mAccuracy : ±0.1%Communic..

Measurement range:• resistant to H2, humidity and ozone• Less than 5 seconds start-up time• 11 hours of battery life• Integrated signal-horn• Integrated Bluetooth module (Bluetooth class 1, 100 m coverage) -> sending data to the weldingmachine, Android-mobile phone (10 m) or PC• A Bluetooth recipient module is available optionally• Robust, innovative and handy aluminium case• High-resolution 1“ ..

Floor Testing MachineThe AWM method will:- Provide insight into the initial, early & long term changes that occur on many flooring surfaces & products.- Help architects, designers & specifiers provide suitable long term flooring solutions to their clients.- Assist manufacturers & distributors in developing more durable flooring materials & provide informed datato their customers.- Allow duty hol..

Thermal Oxidation Stability of Aviation FuelsOxidation Stability Test RigASTM D3241, IP 323, ISO 6249,ASTM D1655, D7566, DEF STAN 91-091Test TemperatureProgrammable from 100°C up to 380°CDifferential Pressure0 - 750 mmHg (automatically bypassed at +250 mmHg)Test time RangeProgrammable from 4 to 600 minutesFuel AerationProgrammable time, automatic air flow and controlEfficiency of dessicant check..

Test Methods - MFR & MVRDisplay - Touch ScreenSpecimen Cutting - AutomaticTest Load Applied - ManualTemperature Range - 100-450 Deg CTemperature Control - ≤0.2 Deg CTemperature Resolution - 0.1 Deg CTiming Accuracy - 0.01sDisplacement Accuracy - ±0.1mmAccording to ISO1133, ASTM D1238 MELT FLOW INDEXER - MANUAL TEST LOADS : MFI-400C1더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@ch..

Inside Dimensions 900x600x500mmOutside Dimensions 1460x910x1280mmChamber Volume 270LSaline Box Capacity 25LTesting Temperature NSS ACSS 35°C ±1°C / CASS 50°C ±1°CAir Temperatur e NSS ACSS 47°C ±1°C / CASS 63°C ±1°CAccuracy ofTemperature ±1°CPH Value NSS ACSS: 6.5 ~ 7.2 / CASS: 3.0~3.2Supply Power AC 220V/50HZ AC110V/60HZ Ø20A SALT SPRAY COROSION TETER CHAMBER - VOLUME 270 LITER : ST-270더 자세한 정보는..

Spectral range (50% points)200 to 4000 nmResponse time (63%)Response time (95%)Zero offset due to temperature change (5K/h)Temperature dependence of sensitivity (-30 ºC to +60 ºC)Analogue output (-V version)0 to 1 VAnalogue output (-A version)4 to 20 mADigital output2-wire RS-485Power supply5 to 30 VDCClassification to ISO 9060:2018Spectrally Flat Class A PYRHELIOMETER : SHP1더 자세한 정보는 켐코코리아로 문의하..

Automatic Calibration (AutoCal)Desiccant dry down assembly for high speed measurementsUser selectable engineering units - °C, °F, ppm(v), ppm(w), g/m3, lbs/MMscfAccuracy of ±2 °C (±3.6 °F)300,000 readings. Date and time stamped data, stored in chosen units of measurement, for download to PC.20 separate Location IDs can be entered (alpha-numerical) by user for data collection at pre-programmed lo..

Method: Hot Wire MethodThin film measurement: Not compatibleOn-window display: 5.7 inch color LCDExternal I/O: RS232C : 2ch (Printer, Data Acquisition Software) USB : 2ch (Printer, USB flash drive)/Ambient conditions: emperature : 5 to 35℃/ Humidity : 85%RH or below (no condensation)Power supply: DC24V 5A (main unit), AC100-240V±10% 50/60Hz (AC adaptor)Dimensions: 262(W)×276(D)×158(H)mmWeight: A..

400-750 nm ePAR MeterMemories 99,Optional cable to download 90$Measurement Range 0 to 4000 μmol m-² s-¹Calibration Uncertainty ±5%Measurement Repeatability >0.5%Long-term Drift (Non-stability) >2% per yearNon-linearity >1% (up to 4000 μmol m-² s-¹)Response Time >1msField of View 180°Spectral Range 400 to 750nm ±5nm (wavelengths where response is greater than 50%)Directional (Cosine) Response ±2%..

Durometer D (Peak Pointer) for Hard rubber, PlasticHardness Tester Shore D with PEAK POINTERComply with ISO 7619, ISO 868, ASTM D 2240and JIS K 6253.Manufacturer: Teclock Corporation, Japan DUROMETER D (PEAK POINTER) FOR HARD RUBBER, PLASTIC : GS720G더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@chemcokorea.comWeb. http://www.chemcokorea.com/Blog. http://blog.chemcokorea.com/

Test Methods - MFR & MVRDisplay - Touch ScreenSpecimen Cutting - AutomaticTest Load Applied - ManualTemperature Range - 100-450 Deg CTemperature Control - ≤0.2 Deg CTemperature Resolution - 0.1 Deg CTiming Accuracy - 0.01sDisplacement Accuracy - ±0.1mmAccording to ISO1133, ASTM D1238 MELT FLOW INDEXER - MANUAL TEST LOADS : MFI-400C1더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@ch..