CHEMCOKOREA 켐코코리아

Durometer D (Peak Pointer) for Hard rubber, PlasticHardness Tester Shore D with PEAK POINTERComply with ISO 7619, ISO 868, ASTM D 2240and JIS K 6253.Manufacturer: Teclock Corporation, Japan DUROMETER D (PEAK POINTER) FOR HARD RUBBER, PLASTIC : GS720G더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@chemcokorea.comWeb. http://www.chemcokorea.com/Blog. http://blog.chemcokorea.com/

Test Methods - MFR & MVRDisplay - Touch ScreenSpecimen Cutting - AutomaticTest Load Applied - ManualTemperature Range - 100-450 Deg CTemperature Control - ≤0.2 Deg CTemperature Resolution - 0.1 Deg CTiming Accuracy - 0.01sDisplacement Accuracy - ±0.1mmAccording to ISO1133, ASTM D1238 MELT FLOW INDEXER - MANUAL TEST LOADS : MFI-400C1더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@ch..

Quick Examination – Only 2 minutes per measuring pointMeasurement result immediately availableDocumentation directly at the siteNo vehicle as counterweight necessaryEasy to use -Low tare weight, ergonomic designCan easily be operated by one personTesting even in difficult-to-reach placesIntuitive menu navigationAutomatic storage, evaluation and archivingDetailed correlations to other test method..

Measurable Ksat Values (min):0.01 cm/d (0.004 in/d)Measurable Ksat Values (max):5000 cm/d (196 in/d)Hydraulic Conductivity (Ks) of the Porous Plate:Ks = 14000 cm/d (5512 in/d)Pressure Sensor Accuracy:1 Pa (0.01 cm WC or 0.0001 psi)Temperature Sensor Accuracy:0.2 °C C (0.4 °F)Typical statistical inaccuracy at constant environmental parameter and constant flow resistance of the soilsapprox. 2% (in..

surface tension (SFT)/interfacial tension (IFT)Range:1 to 90 mN/mResolution:0.5 mN/mlinear correctionSample stage travel distance 85mmDimensions footprint:230 mm × 270 mm (W × D)Height 315mmWeight 3kgOptiona Calibration weight:CP11 or CP12 THE MANUAL TENSIOMETER FOR RELIABLE BASIC MEASUREMENTS : K6 더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@chemcokorea.comWeb. http://www.chemc..

1、Impact Energy：300J 150J2、Impact speed：5.2m/s3、Pendulum pre Yang Angle：150°4、The sample bearing span：40mm5、The pedestal jaw with rounded corners：R1.0~1.5mm6、Impact blade rounded corners：R2.0~2.5mm （ R8mm）7、Pendulum impact center to some distance：750mm8、Standard sample size：10×10(7.5 or 5)×55mm9、moment of pendulum ： M=160.7695N.m 80.3848N.m10、Power supply and power: three phase four wire 50Hz 38..

pH/Ion Meter pH/ISE/Temp.(mV/ORP/pX) desktop meterWithout electrode.Electrode must be purchased separately.See the Datasheet of the device.Color High contrast LCD touchscreen, 7.0 inches.Intelligent operation system provides featuresincluding user management, calibrationmanagement, method management, datamanagement and etc.Multi-reading feature allows auto-read, timed-readand continuous-read.Aut..

Frequency: cycles /sec: 2.6Amplitude of movement: 40mmLength of foot: 100mmFoot width, mm: 11.5Gap between clamps, mm: 12.0Base bar width, mm: 11.0Load applied by foot: 10NDistance between base bar & upper plane oflower clamp: 3mm FLEX ABRASION (SCRUB) TESTER : FAB-LW더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@chemcokorea.comWeb. http://www.chemcokorea.com/Blog. http://blog.che..

temperature measurement -200°C to 1400°Ctemperature recording with a resolution of 0.1°C in the range of -200°C to 1000°C in the remaining 1°Caccuracy 0.6°C in the range from -10°C to 150°C:registration is signaled with the LOG sign on the displaydisplaying information about exceeded permissible valuesstart directly from the computer with a time delay or START/STOP from the buttonrecording frequ..

Digitall Pipette 0.5-10 ul/0.1ulVolume Range:0.5-10μlIncrement:0.1μlInaccuracy (±)%:1-2.5 volume dependentImprecision (±)%: 0.8-1.5 volume dependentIncludes calibration report conforming to EN-ISO 8655 standardsComfortable Finger RestErgonomy hand grip for comfortShaft shape reachable narrow or deep tubesOptinal stands:for 4 Micropipettes cat# 151-1-000013for 6 Micropipettes cat# 151-1-000014Opt..

Volume: 100 LiterInternal Dimensiones (mm): W500*H500*D400External Dimensiones (mm): W700*H1552*D1320Temperature Range: -20-150 Celsius DegreesHumidity range: 20%-98% RHTouch screen programmer VERTICAL TEMPERATURE/HUMIDITY CHAMBER 100L, -20~150℃ : FP-40V더 자세한 정보는 켐코코리아로 문의하세요~!켐코코리아 주식회사Tel. 043-215-2012e-mail. ck@chemcokorea.comWeb. http://www.chemcokorea.com/Blog. http://blog.chemcokorea.com/

Soiling Monitoring System of PV panelsTransmission Loss (TL) rangePercentage of sunlight that is blocked orscattered in such a way that it does not reach the actual solar cells 0 to 50%Soiling Ratio (SR) range100 to 50 % (SR = 100 –TL)Transmission loss measurement accuracy±0.1 of reading ±1% (after local dust calibration)Operational temperature range-20 to +60 °CBack of module temperature sensor..